UFO Air UT by Power Tornado
- Add Your Review (100 Points)
-
Share on Social Media (5/10/50/100 Points)
UFO Air UT by Power Tornado
The UFO Air UT is designed to be the ultimate "fairway navigator," bridging the gap between your woods and irons with an emphasis on stability and versatility. It retains the signature easy-launch properties of the UFO series but adds aerodynamic refinements to improve directional control, aiming to make your approach shots significantly more accurate than a standard long iron.
Universal Wing & Air Turbulator The distinctive Universal Wing at the back of the head is now equipped with an Air Turbulator. This aerodynamic addition stabilizes the head’s behavior during the swing, reducing the "wobble" that leads to off-center hits. The wing's solid structure also shifts the center of gravity deep and low, helping to launch the ball high while resisting twisting at impact.
Gravity Bridge New to this model is the Gravity Bridge, a rib structure placed outside the sole’s perimeter. This design pushes the center of gravity even lower than previous models, making it easier to pick the ball up cleanly from tight lies and launch it high into the air.
Diffuser Back Sole The sole is engineered to handle any lie, from fairway to rough. It features a Diffuser Back Sole design with three blades on the toe side. These blades help the club cut through grass with minimal resistance, ensuring you don't lose swing speed when the ball is sitting down. The "diffuser" shape at the rear further smooths out turf interaction, allowing the head to exit the grass cleanly.
Forged Super Hyten Face The face is made from Forged Super Hyten, a high-tensile alloy originally developed for aerospace. This material is stronger than titanium, allowing for a thinner, more responsive face that delivers high ball speeds and a crisp feel.
Falcon Shaft Air UT The club comes with the specialized Falcon Shaft Air UT, featuring a thick 9.5mm tip diameter. This extra thickness at the tip enhances stiffness to prevent the head from twisting on impact, while the butt section remains flexible for a smooth, easy swing.
Loft Lineup With a massive range of 9 lofts available—from #33 (15°) down to AA (46°)—the UFO Air UT allows you to replace your entire set of irons (except for wedges) with these easier-to-hit utility clubs. This "complete replacement" strategy is perfect for players who want a consistent, high-flying trajectory from every distance.
N.S.PRO 950GH Shaft is custom order ( 4-6 weeks )
SPECIFICATION
| Subject | Men's |
|---|---|
| Material | Head material: Forged super high tensile/stainless steel |
| Country of manufacture | Japan |
| Shaft Name | flex | weight | torque | kick point |
| Falconshaft AIR UT | S | 55 | 3.4 | Medium |
| R | 43 | 4.3 | Medium |
| Club No. | #33 | #44 | #55 | #66 | #77 | #88 | #99 | #PP | #AA | |
|---|---|---|---|---|---|---|---|---|---|---|
| Club length (inches) | 41.5 | 40.75 | 40.0 | 39.25 | 38.5 | 37.75 | 37.0 | 36.25 | 35.75 | |
| Loft angle (°) | 15 | 18 | 22 | 26 | 30 | 34 | 38 | 42 | 46 | |
| Lie angle (°) | 58.5 | 59.0 | 59.5 | 60.25 | 61.0 | 61.75 | 62.5 | 62.75 | 63.0 | |
| Head volume (ml) | 130 | 127 | 123 | 121 | 106 | 99 | 92 | 90 | 87 | |
| balance | S | D0 | D1 | |||||||
| R | C9 | D0 | ||||||||
| Head Material | Forged super high strength steel / stainless steel | |||||||||
| grip | Original Rubber Grip M60 49g | |||||||||
| Club weight (g) | S | 330 | 337 | 345 | 352 | 361 | 369 | 378 | 388 | 397 |
| R | 319 | 326 | 334 | 341 | 350 | 358 | 367 | 377 | 386 | |
*Club length is based on the 60-degree measurement method.
Tip diameter: 9.5mm
. *Made in Japan
| Shaft Name | flex | weight | torque | kick point |
| NSPRO 950GH UTILITY | S | 98 | 2.1 | Medium |
| Club No. | #33 | #44 | #55 | #66 | #77 | #88 | #99 | #PP | #AA | |
|---|---|---|---|---|---|---|---|---|---|---|
| Club length (inches) | 41 | 40.3 | 39.6 | 38.9 | 38.2 | 37.5 | 36.8 | 36.1 | 35.4 | |
| Loft angle (°) | 15 | 18 | 22 | 26 | 30 | 34 | 38 | 42 | 46 | |
| Lie angle (°) | 58.5 | 59.0 | 59.5 | 60.25 | 61.0 | 61.75 | 62.5 | 62.75 | 63.0 | |
| Head volume (ml) | 130 | 127 | 123 | 121 | 106 | 99 | 92 | 90 | 87 | |
| balance | D1 | |||||||||
| Head Material | Forged super high strength steel / stainless steel | |||||||||
| grip | Original Rubber Grip M60 49g | |||||||||
| Club weight (g) | 372 | 378 | 385 | 393 | 401 | 409 | 417 | 426 | 435 | |
*Club length is a design value based on the 60-degree measurement method.
*Steel shaft specifications are made to order.
*The listed loft angle, lie angle, balance, and club weight are measured values. Actual values may differ slightly.
*Shaft weight is the weight before cutting.
*Made in Japan

Login To Tourspecgolf
Create An Account