Introducing Fire Express UT HR Technology Shaft. Matching with a driver shaft that speeds up! The power chip structure suppresses the opening and closing of the head and realizes a high launch angle.
A driver shaft that is becoming faster due to the adoption of a highly elastic and high-strength sheet. Although it has the same speed feeling as the high-speed driver shaft "HR" of the Fire Express series, it has increased the meet rate and adopted the "six-axis braided cloth sheet" for the first time for the UT of the Fire Express series.
The 60g range is the "TORAYCA® M40S" and the 50g range is the "TORAYCA® T800S" high-strength sheet, which is lighter in weight but has increased overall rigidity, giving it a sharp feel with a sense of speed. In addition, a "power chip structure" with a tungsten powder sheet mounted on the chip side is adopted.
Controls bending while suppressing toe down and opening and closing of the head. It improves the meet rate, suppresses hits and losses, and makes it easier to control the launch angle. We have a lineup of 50g and 60g units that can be set with wood shafts that tend to be lighter.
The appearance is clear on the hand side, silver in the middle part, and black clear color scheme at the tip. The 6-axis cloth sheet that can be seen at the hand and the tip creates a unique presence. In addition, Fire Express's first matte finish enhances the freshness and premium feel.
ABOUT THIS PRODUCT LISTING
- Utility Shaft
- Available on 3 model based on weight
- The frequency is a guide when assembling with a head of 236 g and 40.0 inches (measured by the 60 degree method).
- The frequency may change significantly depending on the depth of the hosel insertion.
- The chip parallel length is 75 mm.