Introducing Honma Beres NX Iron, This series targets golfers with a head speed of around 40m/s, which is the most popular among golfers. Many average golfers have experienced the speed of breaking through their own limits, and the stable and strong trajectory. It is a product that allows you to extend your physical distance.
The NX Series is the next-generation BERES brand that revolutionizes the concept of design and function. An iconic product. The lineup includes drivers, fairway woods, utilities, and irons.
Tungsten weight & vibration absorbing resin bar
The center of gravity is controlled by incorporating a tungsten weight and a vibration-absorbing resin bar into the cavity. In addition, the weight closer to the toe improves straightness and realizes high tolerance for impact blur.
The synergistic effect with the wide sole creates a low and deep center of gravity, and even with a strong loft, it exhibits high trajectory and high flight distance performance.
Vibration Absorbing 3D Emblem
By attaching the 3D back face emblem to the face, it absorbs vibration at the time of impact. Achieves a hit feeling and sound like soft iron forging.
L-CUP face (#5-#9)
Honma has succeeded in reducing the thickness of the face as much as possible by increasing the rigidity of the head with a vibration-absorbing resin bar and 3D emblem and by absorbing the shock at impact. This achieves high repulsion performance over a wide range of the face, with a firm spin and a feeling of flipping. Demonstrates high flight distance performance even on missed hits.
Low Center of Gravity
Surplus weight due to hollowing out the vibration absorbing bar insertion part and ultra-thin face is placed on the sole along with the tungsten weight. This thoroughly pursues a low center of gravity. It ensures a high launch even with a strong loft and achieves the ideal trajectory required for irons.
VIZARD shaft for the exclusive use of NX which catches it easily, and maximizes the muzzle velocity of the ball. The difference in rigidity between the middle part and the hand side is increased to maximize head speed with sharpness. This original design realizes compatibility with ease of swinging. Furthermore, by suppressing the tip rigidity, it demonstrates high launch and good grip.
P-SAT Precision Spine Management
Set the spine at 6 o'clock for all clubs. It stabilizes the behavior of the shaft and enhances the completeness of not only the club alone but also the entire set.
ABOUT THIS PRODUCT LISTING
- PRE-ORDER: OFFICIAL RELEASE DATE: NOV 25, 2022 -
- Vizard for NX 45 is its standard shaft
- NSPRO 850GH Neo is custom order ( 6-8 weeks )
|Count / loft angle (°)||5I / 21||6I / 24||7I / 27||8I / 31||9I / 35||10I / 40||11I / 45||AW / 50||SW / 55|
|Head material/manufacturing method||17-4 + body (casting) + [#5-8] AM355P face (casting), [#9-SW] CH170 face (rolling)
+ [#5-8] stainless steel screw + tungsten + resin
|head finish||2-layer plating half mirror + mirror finish|
|Lie angle (°)||61.0||61.5||62.0||62.5||63.0||63.0||63.0||63.0||64.0|
|Length (inch)||VIZARD FOR NX||38.25||37.75||37.25||36.75||36.25||35.75||35.5||35.5||35.0|
|N.S.PRO 850GH neo||38.0||37.5||37.0||36.5||36.0||35.5||35.25||35.25||35.0|
|Balance/gross weight (g)||VIZARD FOR NX 45||R||D0/ 349||D0/ 355||D0/ 362||D0/ 368||D0/ 375||D0/ 381||D0/ 383||D0/ 383||D1/ 391|
|SR||D0/ 350||D0/ 356||D0/ 363||D0/ 369||D0/ 376||D0/ 382||D0/ 384||D0/ 384||D1/ 392|
|S||D0/ 352||D0/ 358||D0/ 365||D0/ 371||D0/ 378||D0/ 384||D0/ 386||D0/ 386||D1/ 394|
|N.S.PRO 850GH neo||R||D1/ 395||D1/ 401||D1/ 408||D1/ 415||D1/ 422||D1/ 429||D1/ 432||D1/ 432||D2/ 438|
|S||D1/ 398||D1/ 404||D1/ 411||D1/ 418||D1/ 425||D1/ 432||D1/ 435||D1/ 435||D2/ 441|