Introducing New Honma Beres 2020 5 Star Driver. The Newest Beres Series from Honma. The standard in master craftsmanship. Featuring a timeless design and built using precious metals, Beres clubs provide unparalleled beauty and can only be built by a Honma master craftsman. Honma team of craftsmen in Sakata, Japan pore over every contour and detail until perfection is achieved. Beres products also feature industry-leading technology to provide feel and confidence to play your best golf.
Wide Slits - Wide slits maximize the slit effect (high initial speed, high launch, spin optimization). In addition, flight distance loss during off-center hits is reduced.
High-rigidity Ti5N face with ultimate enhancement on the entire face.
Down Ratio of the coefficient of restitution centering on the sweet spot.
Crown Thickness Design - Ultra-low specific gravity titanium alloy “Ti811” adopted Step-by-step thinning to 0.45mm → Lightweight approx. 3g: Reflect surplus weight in optimum center of gravity design → Realize hammering due to bending effect of crown
NEW ARMRQ Shaft - The most characteristic “total soft” of the ARMRQ shaft has been changed to “medium soft”. Lamination of the newly developed 7-axis sheet at hand creates counter balance, and sharpening is achieved with all layers of TORAYCA (R) T1100G. For 3S grade and higher shafts, TORAYCA (R) M40X is used to improve playability. Achieves higher swing speed with higher accuracy.
About This Product Listing
- Available in 3 lofts option: 9.5* / 10.5* / 11.5*
- Standard spec for 5S Driver is 10.5 with ARMRQ 47 5 Star ( R ), other than that is a custom order.
- Custom Order ( Custom Spec / Custom Crown Color / Custom Shaft Color ) takes 6-8 weeks to be shipped.
ARMRQ 4S Shaft Specification
|Shaft||ARMRQ 47 5S||ARMRQ 42 5S|
|Material||Metal hybrid 7-axis sheet + TORAYCA (R) T1100G + M40X||Metal hybrid 7-axis sheet + TORAYCA (R) T1100G + M40X|
|Condition||First tone||First tone|
|flex||R, SR, S||R, SR, S|
Bat diameter (mm)
|Tip diameter (mm)||8.6||8.6|
|+0.5 inch||+0.25 inch||standard||-0.25 inch||-0.5 inch|
|ARMRQ 42||D4 (D3-D5)||D3 (D2-D4)||D1||D0 (C9 to D0)||C9 (C8 to C9)|
|ARMRQ 47||D4 (D3-D5)||D3 (D2-D4)||D1||D0 (C9 to D0)||C9 (C8 to C9)|