Kamui Works KM-200 Air Driver Head Only
Kamui Works Japan is the leading manufacturer of custom made drivers, assembled and finished by hand here in Japan. The new KM-200 Air takes Kamui Works drivers to an all new level. Lke all other Kamui Works drivers is made in Toyama Japan and assembled and finished by hand. The head is a multi piece design welded together by hand and hand finished. Because it is all done by hand, they can easily control real specs such as loft, lie, face angle and check the specs along the way as the driver is being built.
The KM-200 Air features what KW calls a Particular Titanium Face. It is a specially forged variable thickness Beta Ti face. Kamui works has also developed an all new crown and body for the Air which further increases the heads repulsion abilities.
Thanks to the new crown design which increases ball speeds at impact and creates a larger sweet spot, Kamui works touts the Air as their most forgiving and best distance driver ever and compared to previous models which were considered older more traditional designs. The addition of injected Air into the head to increase pressure couple with a non conforming HI COR face make the KM-200 Air one hot driver.
The following options are available for the Kamui KM-200 Air:
USGA Conforming or Non Conforming 0.88 COR Head
Real Loft from 8* to 12* (Please note that if you choose an inbetween loft ie 10.5*, the head will be marked as 10*)
Real Lie from 57* to 61* (We have seen them go as flat as 55*)
Real Face Angle from 2* open to 2* closed
Head Weight from 192g to 208g
2 levels of Air Pressure, 150kpa for under 90mph swing and 170kpa for over 90mph
Crown Finish, Black Metallic, Wine Metallic, Green Metallic, or White
Sole Finish, Silver or Black IP
This listing is for the head only hand made Kamui KM-200 Air.
We have another listing for a custom shafted version.
All Kamui heads are made on order by hand and take approximate 2-3 weeks.