Some clients prefer not to wait 3-4 weeks for their custom GF putter so we decided to bring in a few so they can ship quickly. In this blog post we will be covering the 5 latest custom and modified Gold’s Factory Putters recently added to the store.
Make sure to move fast if you are lusting over one of these fine flat sticks as there is only 1 of each already made and the modified putters can’t be ordered on a normal basis unless you send in a head first. Follow the Jump to Read On…
Based on the Newport 2 Replica body by Gold’s Factory this putter features next-gen PZ milling, 2 orbit G weights. This is a GF custom so it can be ordered any way you want it with more or less options in a different color theme so it’s up to you. Its made of JSS which is the equal in mineral content to GSS but from Japan. The total head weight is a heavier 365g it’s at 34″ witha matching GF original grip | Official listing: Click Here
Total Weight: 535g
Head Weight: 365g
Swing Weight: E4.4
Lie Angle: 71.5°
Loft Angle(Sole): 6°
Real Loft Angle: 5°
Face Angle: 4°open / Shaft Angle: 1.3°open
Frequency: 356cpm
Shaft: Gold’s Factory Original 34″(Spine Aligned)
Grip: Gold’s Factory Original(Blue)
—
Next up we have a Custom GF00A which we have 1 in stock or it can be special ordered in 3-4 weeks with all the options you want. Made with a flat face this one also has a heavy head weight of 365g, the unique black dots on the bumpers and matching dots on the sole are not a common design for GF.
Total Weight: 541g
Head Weight: 365g
Swing Weight: F3.2
Lie Angle: 71.5°
Loft Angle(Sole): 6°
Real Loft Angle: 5°
Face Angle: 4°open / Shaft Angle: 1.3°open
Frequency: 345cpm
Shaft: Gold’s Factory Original 35″(Spine Aligned)
Grip: Gold’s Factory Original(Black)
—
And now on to some modified putters, this next one is a classic, the Prototype M402 is a mallet designed by master Sasaya that is no longer offered in the main line up. It’s not easy to find so when I was able to find this one it deserved extra special attention by adding a light next gen pz face milling along with tungsten weighting to bring the head weight up, a nice Teflon black finish and unique orange / white paint fill theme.
Total Weight: 532g
Head Weight: 359g
Swing Weight: E7.2
Lie Angle: 71.5°
Loft Angle(Sole): 6°
Real Loft Angle: 5°
Face Angle: 4°open / Shaft Angle: 1.3°open
Frequency: 337cpm
Shaft: Gold’s Factory Original 34″
Grip: Gold’s Factory Original(Black)
Light Next Gen PZ Milling
—
Here is another modified putter no readily available by Gold’s Factory based on the GF Del Mar 3 Replica Head it’s been further enhanced with again light PZ mill, teflon black and arc reactor accents on the toe and inside the back cavity as well as a welded neck then finally finished off in a red and white paint theme. This particular head is well suited to faster greens hence it’s lighter head weight and specs.
Gold’s Factory Del Mar 3 Replica Putter Modified
Total Weight: 495g
Head Weight: 328g
Swing Weight: D0
Lie Angle: 71.5°
Loft Angle(Sole): 6°
Real Loft Angle: 5°
Face Angle: 4°open / Shaft Angle: 1.3°open
Frequency: 370cpm
Shaft: True Temper USTP-2B 34″
Grip: Gold’s Factory Original (Black)
—
Finally a Modified and rare Yamada Dream 54 Putter by Golds Factory, done up with a Next Gen PZ Milling & Smoked Copper Finish that’s all that was needed here. This finish is started with a copper dip then followed by a black dip then torched and hand polished to have this rustic yet luxurious look.
Total Weight: 512g
Head Weight: 344g
Swing Weight: D4.1
Lie Angle: 69.5°
Loft Angle(Sole): 3°
Real Loft Angle: 2°
Face Angle: 3°open / Shaft Angle: 1°open
Frequency: 365cpm
Shaft: Gold’s Factory Original 34″(Spine Aligned)
Grip: IOMIC Regular Size(Black)
