Introducing the BENOCK Solid Gate Putting Aid!

SOLID GATE by Benock –  You are looking at one of the coolest and most sadistic putting trainers the golf market has ever seen.  Oh and by the way it’s better made than just about any putter on the market,  pure quality micro-milled of A5052 (JIS) manufactured in Kyoto Japan at the Benock HQ.

The Solid Gate putting trainer allows practicing of repeatable putting with focus on aim and distance control.  The emotion of nailing a put perfectly and getting the ball to stop on one of the two notches will make you ecstatic.  By requiring perfect distance control and aim it really helps in creating a zeroed in focus which ultimately makes the cup seem huge when you are on the golf course.  Follow the jump for many pics and a detailed explanation of how it works…

The Solid Gate comes with a guide that features 3 lessons.  After taking those lessons you pretty much understand the idea of why this putting aid is genius.  There are two dimples one on each level and the ultimate goal is to putt the ball to rest and stop on one of them.

It starts with establishing your baseline which helps you assess your ability by measuring your current dispersion.  One must understand that putts that pass the target do not count as a putt made.

The first lesson is to stand at a distance you are comfortable putting from.  Then try to hit the ball firmly with the strength to reach 1m ( approx. 39 inches ) beyond the front edge of Solid Gate and aim to the right or left of the center dimple.If you are able to get the ball to roll off to the right or to the left from the 2nd level channel shown in light blue, this indicates that you are putting with the right speed.

Next, try and hit the ball with the speed to reach 1.5m ( approx. 59inches ) beyond the front edge of Solid Gate and stop it at the dimpled section at the center of the 2nd level channel. This requires you to putt with a side deviation of less than 1mm from the center line. This concludes Lesson 1.

Lesson 2 – Practice putting 50cm (approx. 20 inches) beyond the front edge of Solid Gate. Practice putting with the speed to reach 50cm ( approx. 20 inches ) beyond the front edge of Solid Gate and aim to the right or left of the center dimple.

If you are able to get the ball to roll off to the right or to the left from the 1st level channel shown in pink, this indicates that you are putting with the right speed.

Next, try and hit the ball with the speed to reach 50cm ( approx. 20 inches ) beyond the front edge and stop it at the dimpled section at the center of the 1st level channel. This requires you to putt with a side deviation of less than 1mm from the center line.  This concludes Lesson 2.

When you have finished Lessons 1 And 2, try stopping the ball at both the 1st level and 2nd level channels respectively at the center dimpled sections.  Your practice is now complete!

You can continue to go through the lessons over and over which is what I suggest if you want to improve faster or you can simply hone your skills by trying to get the ball to stop on one of the dimples.  Its rather difficult to do but very rewarding when it happens.  The Solid Gate by Benock is something every golf maniac should have in their office or home if they have a synthetic green to put on.  I enjoy keeping one in my tour bag and letting golfers on the practice green experience it for themselves.
Coming next week to the TSG ProShop!