The new TRPX driver features a 2 piece Forged Titanium construction and are available in two models, the deep faced D-013 and the slightly more shallow faced S-013 where the CG is slightly lower and deeper due to the shallow nature of the S-013.
Both D and S models are focused on max distance with stability by producing optimal launch angle, spin and maximum ball speeds at impact. TRPX focused on ideal weight distribution, optimal CG placement, just the right amount of bulge and roll in order to create a huge sweet spot and minimal loss of energy at impact.
The TRPX Driver is an original design collaboration between TRPX and JGE Tokyo (JBeam). ABEX, chief designer at TRPX explains that the two drivers basically fit into two type of tee setups, if you tee it high but still want to keep the trajectory strong and spin low, the D is the way to go. But if you tee it lower and produce more of a level blow but want a tad more launch, the S is the way to go.
The deeper D model will allow for more workability like fade and draw due to high back head while the S Model is more straight to draw oriented and with distance as the primary goal.
TSG is offering TRPX drivers as either heads only or custom built with any TRPX shaft.
All TRPX shafts are also listed separately in our shop for reference.
If you are unsure of which shaft and head you want, feel free to contact us anytime for advice.
All TRPX driver builds take approximately 10-14 days (sometimes faster) so please keep that in mind when ordering.
For any special requests, please make note in the Special Instructions box above.
Below is a visual comparison of both models for reference.
|Specifications||Loft||Lie||Volume||Face Angle||Head Weight|
|D-013||8.0-12.0||59.5 - 60.0||450cc||0-1.0 Open||195-201g|