|
|
Questions about this product?
|
|
PRGR introduces their all new RED 505 driver for 2010. The RED 505 features a design that promotes square impact resulting in increased smash factor, higher speed efficiency and more overall distance. This is done by placing the center of gravity at a different location from the actual center of the face of the driver. The CG is moved closer to the heel to increase ball speeds on contact. Opposite the CG point and on the other side of the center of the face is the maximum bend point of the face. These three points, CG, Center and Bend point create a huge sweet spot that covers the whole face of the driver. The forged titanium face also creates a crisp higher pitched sound on impact. The audible feedback is rewarding for excellent impact and timed shots. PRGR studied 3757 amateur golfers and discovered that 67% had outside in swings, or over the top and slice swings. This produces a glancing blow reducing smash factor and resulting in a big loss of distance and accuracy. Many players do not get the type of distance their swing speeds should be producing due to poor impact angle. The RED 505 is designed to produce square straight on impact for maximum distance. The new confomring made in Japan RED 505 features a new shaft made for PRGR by Mitsubishi Rayon. The new shaft features a stiffer tip for more control and lower spin. The RED 505 is available in 10.5 11.5 and 12.5 lofts and M-37 (R2) M-40 (R) and M-43 (Stiff/Reg) flexes. These flexes are all 45.75" driver lengths. There is also an M-35 flex at 45" for the slower swinger under 80mph (can be considered a soft senior flex or stiff ladies flex.) | 
